Endress+Hauser Smartec S CLD134 - Exploded View

Smartec S CLD134 Troubleshooting
Endress+Hauser 73
9.5.1 Exploded view
The exploded view drawing shows all components and spare parts of Smartec S CLD134. Use the
position numbers to find the spare parts designation and their order number in the following section.
a0005652-en
A
l
a
r
m
C
A
L
-
E
+
Pos. 140
Pos. 20
Pos. 60/61
Pos. 80
Pos. 120 ... 122
Pos. 110
Pos. 70 ... 75
Pos. 90 / 91
Pos. 130
Pos. 100 /101
Pos. 50 ... 55
Pos. 40
Betrieb nur mit dieser Abdeckung
und
S
chutzleiteranschluß
Operation only with this cover
and protective earth connection
Betrieb
nur
mit
dieser Abdeckung
und
Schutzleiteranschluß
Operation
only
with
this
cover
and
protective
earth
connection
Pos. 10
Pos. 30
Slot for screwdriver to
unlock protective cover
Install electronics box first,
then connect instrument
and snap on protective cover
Ribbon cable on
right plug connector
(module viewed from
front)
Fuse
M3, 15A /5*20
all variants
First corner to be
inserted into electronics
box during assembly
Corner into
which power
supply assembly
is inserted