Engcon EC02 - Post-Installation Checks

4 Installation
4.5. On completion
1. Affix the warning decals supplied in a conspicuous
place in the operator's cab, without obscuring operator
visibility.
WARNING
Replace damaged or
illegible signs and
decals before using
the machine. Risk of
personal injury and
damage to property.
2. Carry out a function check; contact your service
partner.
Figure 11.
- Check that the tiltrotator functions as per section 5.8.
Maneuvering.
- Run the tool functions a few times to remove any air
from the system. Important for preventing uncontrolled
movement.
- Make sure the tool operates when the hydraulics are
running.
- Check that the hoses are not subjected to pinching,
cutting or stretching.
22