Engcon EC02 - Lubrication Schedule (Every 8 Hours); Tiltrotator Lubrication

6 Maintenance
REMARKS
Install the tapered
face seal with
a narrow edge
outward.
Figure 24.
6.4. Lubrication every 8 operating hours
Grease recommendation:
On delivery, we fill your product with our recommended universal mineral oil-based grease
with an EP additive, a lithium soap thickener and a hardness of (NLGI) 2. In severe cold
we recommend hardness (NLGI) 1.
6.4.1. Tiltrotator lubrication
To grease the tiltrotator, connect a grease gun to the grease nipples as illustrated in the
lubrication chart. Grease the tiltrotator until you see grease force its way out at all axles
and bearings. Wipe the nipple and nozzle thoroughly clean before attaching the grease
gun.
42