8. Maintenance and Prevention CC300 Operator Panel – User Guide
8.6. Firmware Updates
8.6.1. System BIOS Update Procedure
To update the System BIOS the BIOS ROM File and the update tools shall be copied onto a bootable DOS
USB Stick (no EMM386 or himem driver installed).
The USB Stick shall be the first Boot Device and must have following files:
1B754003.bin BIOS Image (current BIOS; this file may change!)
AFUDOS.exe Flash Tool
pr_bios.bat Batch file
To start the update process, run the included batch file.
After BIOS flash update is finished, perform a power cycle to restart the system.
On the next boot the BIOS will enter Setup automatically.
8.6.2. Firmware Update of the IO Board
-to be completed-
8.6.3. Firmware Update of the Rotary/Push Button
-to be completed-
8.6.4. Firmware Update of the RFID Module
-to be completed-
8.6.5. Firmware Update of the capacitive Touch
-to be completed-
Preliminary Version 0.2 37
To Next Page
Loading...