Connects to Charger AC Adapter.
Charges handset battery when handset is placed in the cradle.
Refer to the handset LCD for charging status.
Charging: battery status bar is running and the LCD screen shows: “Charging.”
Fully Charged: battery status bar stands still and the LCD screen displays
“Charge Complete.”
Charge Fail: If an error occurs during charging mode, the LCD screen will
display “Charge Fail.”
It is impossible to overcharge the battery using this charger.
The charging station adapter can also be used as a travel charger. However,
you cannot turn off the power while you charge the handset via the travel
charger. A warning message, “Unplug Travel Charger then OFF” will be shown
on the LCD.
Notes:
1. Fully charge battery packs before first use.
2. Handset will “power on” automatically when placed on the charging
slot.
3. However, if you drain the battery completely, it will take
approximately one minute for the handset to auto power on.
To Next Page
Loading...
