EnGenius DuraFon - Making a 2-Way; Intercom Call; Intercom Call Procedure; Making a Broadcast; Broadcasting to All Handsets

~30~
Making a 2-Way/ Intercom Call
The DuraFon-SIP Cordless Phone System offers private, Intercom/ 2-Way Radio calls
independent of the base station. Intercom/ 2-Way communication can be placed
between handsets.
1.
Press key followed by a two-digit handset ID or
Group ID.
Enter Ext #:
##
PHBOOKBASE
2.
Press key to end the call.
Notes:
1. Intercom calls can be made regardless of the Base Station being
present.
2. If a Group ID is entered, the first handset (belonging to that
group) that answers will establish a link with the caller. See
Handset Group Subscription.
3. If a link cannot be established, the LCD shows “Paging timeout”
after a 35-second time out.
Making a Broadcast
Handset-to-Handset Calls
1.
Broadcasting to all handsets
11
PA to ALL
REDIAL MENU
a.
Press and hold key from one handset.
b.
Start speaking the broadcast message once you hear the key tone; the
speakerphone of destination handsets will open when it receives the voice.
Re: the initiating handset needs to press and hold key while
speaking or broadcasting.
c.
Release key to end broadcasting.
2.
Broadcasting to a group of handsets
11
PA to Group #91
REDIAL MENU
91