EnGenius DuraFon - Menu Operations; Menu Navigation and Sounds Settings; Call Settings Menu

~64~
1.
Press MENU (Right) soft key to enter menu mode while the phone is in standby
mode.
Re: You can either press or , followed by SELECT (Left) soft key to
confirm the selected menu. Or press the digit directly to confirm the
selected menu. For example, press MENU (Right) soft key followed by 4 and
1 to select the Ring Volume.
2.
Press 1 to select Key Guard (see Key Guard operation on page 35 ).
3.
Press 2 to add, delete, edit, view and edit the phone book (see Phone book
instruction on page 39).
4.
Press 3 to set Sounds settings:
a.
Press 1 to select Ring Volume:
Two options for ring volume: Line (for incoming call) and Intercom (for
intercom call). Set each option respectively.
When setting each option, use or to scroll through 6 options:
“Off,” “Low,” “Medium,” “High,” “Vibrate” and “Vibrate & High.” Press
SELECT (Left) soft key to save selection. Default = Medium.
b.
Press 2 to select Ring Tone:
Two options for ring tone: Line (ring tone for incoming call) and Intercom
(ringer for intercom call). Set each option respectively.
Use the or to scroll through 8 ringers, press SELECT (Left) soft
key to save selection. Default = 1.
c.
Press 3 to select Key Volume when a key is pressed:
Use or to scroll through 4 options: “Off,” “Low,” “Medium,”
and “High.” Press SELECT (Left) soft key to save selection. Default =
Medium.
d.
Press 4 to select Key Tone:
Use the or to scroll through 4 options: 1, 2, 3 and 4. Press
SELECT (Left) soft key to save selection. Default = 1.
5.
Press 4 to set Call Settings:
a.
Press 1 to set Dial Prefix: