EnGenius DuraFon - Menu Operations; Base Settings Management; Menu Display Settings

~67~
(1)
Enter 2-digit handset ID, then press OK (Left) soft key.
(2)
The base will erase the handset ID from the system.
c.
Press 3 to Change PIN:
(1)
Enter the new Base PIN followed by OK (Left) soft key.
Re: Default Base PIN is “0000.”
8.
Press 7 to register, de-register handset : see Handset Registration operation on
Page 36.
9.
Press 8 to set Menu Display:
To avoid mis-setup of Call Settings (MENU-4), Phone Settings (MENU-5) and Base
Settings (MENU-6), you can hide these menus, so that other handset users won’t
have chance to mis-settup these settings.
Re: When entering the Menu Display, you have to enter password first.
a.
Press 1 to set hiding/un-hiding of the Call Settings menu.
(1)
Use CHANGE (Left) soft key to select and confirm On or Off.
b.
Press 2 to set hiding/un-hiding of the Phone Settings menu.
(1)
Use CHANGE (Left) soft key to select and confirm On or Off.
c.
Press 3 to set hiding/un-hiding of the Base Settings menu.
(1)
Use CHANGE (Left) soft key to select and confirm On or Off.
Re:
Selecting “On” means the menu will be displayed on screen. Selecting “Off”
means the menu will be hidden.