EN109-1665751-44
Performing the Conconi test on the EN-Motion treadmill
Ensure that the user has warmed up properly and
that the heart-rate belt is connected.
Select the Exertion tests function using the central
controller and press OK.
Now enter your personal details before selecting
from the list of available exertion tests.
These details are used to calculate and present the
personal test results.
Select the gender (m/f) using the central controller
and press OK.
Enter the age using the central controller and
press OK.
Enter the height (cm) using the central controller
and press OK.
Enter the weight (kg) using the central controller
and press OK.
All the personal details have now been entered.
The list of Exertion tests will appear.
Select the Conconi test using the central
controller and press OK.
Please note: the use of a heart-
rate meter is required. The EN-
Motion will automatically detect
whether or not you are using
one. If this is not the case, an
information screen will alert you
to this fact. As soon as a heart-
rate meter has been connected
and a heart-rate signal has
been detected, this will be
confirmed by means of a
message on the screen.
To Next Page
Loading...
Need help?
General