The default setting is: Protection = ON
The purpose of the protection function is to
ensure that patients/clients are unable to use
Autospeed by themselves (i.e. not without the
therapist having authorised the use of
Autospeed).
However, the protection function can also be
deactivated. This means that Autospeed can
be activated directly by each patient/client!
To deactivate the security function, select
Protection and press OK.
You will automatically return to the
Autospeed menu.
The icon at the right of the menu bar
indicates that the security function has been
deactivated.
To Next Page
Loading...