Do you have a question about the Enttec S-PLAY and is the answer not in the manual?
Channels | 512 |
---|---|
Ethernet Ports | 1 |
Local Triggering | Yes |
Web Interface | Yes |
Type | DMX Controller |
Control | Web browser, Ethernet, Local Triggering |
Power Supply | 5V DC |
Protocols | DMX512, Art-Net, sACN |
Describes the physical characteristics, dimensions, and ports of the S-Play unit.
Specifies pin assignments for XLR, DB9, GPIO, and Relay connectors for proper connection.
Explains the S-Play's LCD menu navigation, buttons, and home screen display.
Guides on accessing the S-Play via web interface and finding its IP address.
Managing playback cues, defining system events, and setting up triggers for control.
Creating, editing, and managing playlists for automated playback sequences.
Automating playlist playback based on time, date, and frequency.
Configuring device settings, network, outputs (ArtNet, SACN), and date/time.
Changing network settings via LCD or web interface, including IP, Netmask, Gateway.
Procedures for factory reset, backing up, and restoring device settings and data.
Creating static/dynamic cues via manual or network-triggered recording.
Creating and applying visual effects to fixtures using the S-Play.
Controlling playlist playback and previewing individual cues.
Managing device data through backup, restore, and storage selection.
Securing the S-Play by locking the interface and managing user access.
Detailed technical specifications of the S-Play hardware and supported protocols.
Connecting and configuring motion sensors to trigger playlists via digital inputs.