Enttec S-PLAY - Control; Events; Rs232; DMX

S-Play User Manual
Part No.: 51301
8 October 2020
(v23)
Document ID: 4686708 Page|41
Control
Events
Use events to allow integration between S-Play and other devices. S-Play can send commands
over multiple protocols and interact with Relays.
RS232
Make sure the receiver has the correct
communication setup:

Baud rate: 9600

Data: 8bit

Parity: None

Stop: 1bit

Flow Control: none
N.B. ASCII Command text limited to 32 Characters only.
DMX
Send a value over a specified channel on the DMX
port of your choosing.
Set the following:

DMX Port

Channel

Value