Enttec S-PLAY - Artnet; Sacn; Relay

S-Play User Manual
Part No.: 51301
8 October 2020
(v23)
Document ID: 4686708 Page|42
ArtNet
Unicast or broadcast a value over a specified
channel and universe over Art-Net
Set the following:

IP Address (if unicasting)

Output Universe

Channel

Value
sACN
Unicast or multicast a value over a specified channel
and universe over sACN.
Set the following:

IP Address (if unicasting)

Output Universe

Channel

Value
Relay
Control the relay action

NO: Normally Open

NC: Normally Closed
N.B. On system power-up, the Relays position is set
to be normally open.