15
Maintenance And Service
cLeaning DecoRatiVe suRFaces:
Painted and porcelain faces should be wiped with a damp cloth periodically. If a plated face has been
purchased, it should be unpacked/unwrapped carefully to avoid getting anything on the surface of the
nish, including cleaners, polish and nger prints. It is important to note that ngerprints and other
marks can leave a permanent stain on plated nishes. To avoid this, give the face a quick wipe with
denatured alcohol on a soft cloth BEFORE lighting the replace. Never clean the face when it is
hot. Do not use other cleaners as they may leave a residue, which can become permanently etched into
the surface.
saFety scReen:
Figure 17. Safety Screen Removal
A safety screen is installed from the manufacture to protect its users from the dangers of the hot glass
preceding it. There are four safety screen mounting brackets that hold the screen into position as shown
in Figure 17. In order to remove the safety screen it is easiest to grab with both hands from the bottom
and lift the screen up o the mounting brackets and outward.
To Next Page
Loading...
