102 Presenting Through a Wireless Network
Projecting Video Clips
You can project full-screen MPEG2 and WMV video clips with audio
in real time (30 frames per second). For best performance, advanced
wireless mode, 802.11g, or 802.11a are recommended.
1. Click the Movie Sending Mode button on the NS
Connection toolbar.
2. If you are connected to more than one projector, select the one
you want to use for the video.
3. Click the
Select file button. Locate the video you want to project
and click
Open.
4. Use the standard playback buttons on the screen to start, pause,
rewind, and control other video functions.
5. When you’re finished projecting video, click the
Close button on
the screen.
note
Only MPEG1-Layer2
audio is supported. The
maximum supported
MPEG2 video resolution
is 720 × 480 NTSC or
720 × 756 PAL (without
audio).
note
The video will be projected
on the screen, but will not
appear on the host
computer.
To Next Page
Loading...
Need help?
General