12 Welcome
Unpacking the Projector
After unpacking the projector, make sure you have all these parts:
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location. If you are moving the projector by
hand, use the carrying case. See page 13 for ordering information, and
page 180 for transportation instructions.
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■ To receive an S-video signal, you’ll need an S-video cable.
■ To receive a component video signal from a VCR or other video
device, you’ll need an HD15 to component video cable.
You can purchase these items from Epson. See “Optional Accessories”
on page 13.
Projector
Remote control and
2 AAA batteries
PDF manual and
registration CD-ROM
Power cable
VGA computer cable
USB cable
Carrying case
Projector software
CD-ROM
Wireless LAN module
and security screw
To Next Page
Loading...
Need help?
General