84 Presenting Through a Wireless Network
Using Wireless Security Options
You can use the following security options when connecting to the
projector wirelessly: WEP encryption, WPA security, EAP-TLS
certificate validation, or LEAP, EAP, or PEAP authentication. To set
these security features on your wireless network, see your
documentation or get help from your network administrator. See the
following sections to enable the security option on your projector:
■ “Enabling WEP Encryption” below
■ “Enabling WPA Security” on page 86
■ “Enabling EAP, LEAP, or PEAP Authentication” on page 87
■ “Enabling EAP-TLS Certificate Validation” on page 88
Enabling WEP Encryption
1. Press Menu on the remote control, then highlight Network and
press
Enter.
2. Choose
Network Configuration and press Enter.
3. Highlight
Security and press Enter. Then press Enter again to
display the security options:
4. Highlight
WEP and press Enter.