c
Select the audio you want to output, and then press the [ ]
button.
When you select Auto, audio is output for the enlarged screen. If the
screen sizes are Equal, audio is output for the screen on the left.
Ending the split screen
Press the [Esc] button to end split screen.
The following steps can also be used to end the split screen.
• Press the [Split] button on the remote control.
• Select Exit Split Screen on the Split Screen Setup screen.
s p.116
Restrictions during split screen projection
Operating restrictions
The following operations cannot be performed during split screen
projection.
• Setting the configuration menu
• E-Zoom
• Changing the aspect mode
• Using the [User1], [User2], or [User3] button on the remote control
• Help can be displayed only when image signals are not input or when
an error or warning notification is displayed.
• The user's logo is not displayed.
Restriction relating to images
• For the image on the right screen, the default values for the Image
menu are applied. However, the setting values for the image projected
on the left screen are applied for Color Mode, Color Temp., and Color
Adjustment. Also, for Super-resolution in the Signal menu, the setting
values for the image projected on the left screen are applied.
• Auto Iris and Frame Interpolation are not available.
Hiding the Image and Sound Temporarily (A/V
Mute)
You can use this when you want to focus the audience's attention on what
you are saying, or if you do not want to show details such as when you are
changing between files during presentations from a computer.
Each time you press the [A/V Mute] button, A/V Mute turns on or off.
Remote control
Projection Functions
118
To Next Page
Loading...
Need help?
General
Weight and Dimensions
