a
• If Direct Power On is set to On in the Extended menu, the
projector automatically turns on when the power cord is connected
to it. When the power cord is plugged in, note that the projector
turns on automatically in cases such as recovery from a power
outage.
s Extended - Operation - Direct Power On p.142
• If an image signal from the source selected in Auto Power On is
input, the projector automatically turns on.
s Extended - Operation - Auto Power On p.142
Home screen
You can use the Home screen to easily select input sources or frequently
used functions. The Home screen is displayed in the following situations.
• When the [
] button on the remote control is pressed
• When the projector is turned on while Home Screen Auto Disp. is set
to On
s Extended - Home Screen - Home Screen Auto Disp. p.142
• When there is no signal from the selected input source when the
projector is turned on
When the Home screen is displayed, use the [
][ ][ ][ ] buttons on
the control panel or remote control to select an item, and then press the
[
] button.
To hide the Home screen, press the [
] button on the remote control
again.
A
Select the input source that you want to project.
B
Displays the QR code and projects the data of a smartphone or tablet.
C
Displays the Help screen.
s "Using the Help" p.164
D
Displays the Configuration menu.
E
Executes the function assigned to Custom Function 1 or Custom Function 2 in the
Extended menu.
s Extended - Home Screen - Custom Function 1, Custom Function 2 p.142
F
You can adjust the image resolution.
s "Adjusting Image Resolution (Image Enhancement)" p.97
G
Select a color mode.
s "Selecting the Projection Quality (Selecting Color Mode)" p.87
a
The Home screen disappears after 10 minutes of inactivity.
Turning On the Projector
57
To Next Page
Loading...
Need help?
General
Weight and Dimensions
