EasyManuals Logo

Epson EB-G7200W User Manual

Epson EB-G7200W
255 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #156 background imageLoading...
Page #156 background image
Once the Configuration menu content has been set for one projector, you
can use it to perform batch setup for multiple projectors (batch setup
function). The batch setup function is only for projectors with the same
model number.
Use one of the following methods.
Setup using a USB flash drive.
Setup by connecting the computer and projector with a USB cable.
Setup using EasyMP Network Updater.
This manual explains the USB flash drive and the USB cable methods.
a
The following content is not reflected by the batch setup function.
- The Network menu settings (except for the Notification menu and
the Others menu)
- Lamp Hours and Status in the Info menu
Perform batch setup before adjusting the projected image.
Adjustment values for the projected image, such as Geometric
Correction are reflected by the batch setup function. If batch setup is
performed after adjusting the projected image, the adjustments you
made may change.
By using the batch setup function, the registered User's Logo is set
for the other projectors. Do not register confidential information and
so on as the User's Logo.
Caution
Performing batch setup is the customers responsibility. If batch setup fails due
to a power failure, communication error, and so on, the customer is responsible
for any repair costs incurred.
Setup Using a USB Flash Drive
This section explains how to perform batch setup using a USB flash drive.
a
Use a FAT format USB flash drive.
The batch setup function cannot be used by USB flash drives that
incorporate security functions. Use a USB flash drive that does not
incorporate security functions.
The batch setup function cannot be used by USB card readers or
USB hard disks.
Saving settings to the USB flash drive
a
Disconnect the power cord from the projector, and check that all
of the projector's indicators have turned off.
b
Connect the USB flash drive to the projector's wireless LAN unit
port.
s "Installing the Wireless LAN Unit" p.52
Batch Setup
156

Table of Contents

Other manuals for Epson EB-G7200W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-G7200W and is the answer not in the manual?

Epson EB-G7200W Specifications

General IconGeneral
Number of colors1.07 billion colors
Native aspect ratio16:10
Projection distance- m
Projection technology3LCD
Contrast ratio (typical)2000:1
Screen size compatibility50 - 300 \
Projection distance (tele)2.5 - 15.1 m
Projection distance (wide)1.5 - 9.4 m
Projector native resolutionWXGA (1280x800)
Keystone correction, vertical-45 - 45 °
Keystone correction, horizontal-30 - 30 °
Lamp power400 W
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)4000 h
Service life of light source (portrait mode)2000 h
Full HDNo
HD-ReadyYes
Video processing10 bit
Video color modesCinema, Dynamic, Presentation, sRGB, DICOM simulation mode, Multi-projection
Analog signal format system-
Supported graphics resolutions1280 x 800 (WXGA)
Throw ratio1.44 - 2.33:1
Focal length range24 - 38.2 mm
Aperture range (F-F)1.7 - 2.3
Vertical lens shift range-67 - 67 %
Horizontal lens shift range-30 - 30 %
Audio (L/R) in3
Audio (L/R) out1
Serial interface typeRS-232
USB 2.0 ports quantity2
Ethernet LAN data rates10, 100 Mbit/s
Noise level39 dB
Country of originChina
Noise level (economic mode)31 dB
PlacementDesktop, Ceiling
Product typeLarge venue projector
Product colorWhite
Market positioningPresentation
Cable lock slot typeKensington
RMS rated power10 W
Power sourceAC
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.3 W
Power consumption (typical)572 W
Power consumption (PowerSave)477 W
Storage temperature (T-T)-10 - 60 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Pallet width800 mm
Pallet height2425 mm
Pallet length1200 mm
Pallet weight0 g
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet14 pc(s)
Quantity per pallet layer2 pc(s)
Harmonized System (HS) code85286200
Software supportvia: AMX, Crestron (Network), Control4
Weight and Dimensions IconWeight and Dimensions
Depth472 mm
Width525 mm
Height189 mm
Weight12700 g
Package depth765 mm
Package width680 mm
Package height290 mm
Package weight20740 g

Related product manuals