EasyManuals Logo

Epson EB-G7200W User Manual

Epson EB-G7200W
255 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
Submenu Function
IP Settings
(This can only be set if Connection Mode is set to Advanced.)
Configure the network.
DHCP: Set to On to configure the network using
DHCP
g
If this
is set to On, you cannot set any more addresses.
IP Address: You can enter the
IP address
g
assigned to the
projector. You can enter a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask: You can enter the
Subnet Mask
g
for the projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address: You can enter the IP address for the gateway
for the projector. You can enter a number from 0 to 255 in each
field of the address. However, the following
Gateway Address
g
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
SSID Display
To prevent the SSID from being displayed on the LAN Standby
screen, set this to Off.
IP Address Dis-
play
To prevent the IP address from being displayed on the LAN
Standby screen, set this to Off.
Type of security
When the optional wireless LAN unit is attached and being used in
Advanced connection mode, it is strongly recommended that you set
security.
WPA is an encryption standard that improves the security for wireless
networks. The projector supports TKIP and AES encryption methods.
WPA also includes user authentication functions. WPA authentication
provides two methods: using an authentication server, or authenticating
between a computer and an access point without using a server. This
projector supports the latter method, without a server.
a
For setting details, follow the instructions from your network
administrator.
Search Access Point screen
Detected access points are displayed in a list.
Submenu Function
Refresh
Searches for the access point again.
Indicates an already set access point.
Indicates the access points where security is set.
If you select an access point where security has not been set, the
Wireless LAN menu is displayed.
If you select an access point where security has been set, the
Security menu is displayed. Select a type of security according to
the security settings for the access point.
List of Functions
151

Table of Contents

Other manuals for Epson EB-G7200W

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-G7200W and is the answer not in the manual?

Epson EB-G7200W Specifications

General IconGeneral
Number of colors1.07 billion colors
Native aspect ratio16:10
Projection distance- m
Projection technology3LCD
Contrast ratio (typical)2000:1
Screen size compatibility50 - 300 \
Projection distance (tele)2.5 - 15.1 m
Projection distance (wide)1.5 - 9.4 m
Projector native resolutionWXGA (1280x800)
Keystone correction, vertical-45 - 45 °
Keystone correction, horizontal-30 - 30 °
Lamp power400 W
Light source typeLamp
Service life of light source3000 h
Service life of light source (economic mode)4000 h
Service life of light source (portrait mode)2000 h
Full HDNo
HD-ReadyYes
Video processing10 bit
Video color modesCinema, Dynamic, Presentation, sRGB, DICOM simulation mode, Multi-projection
Analog signal format system-
Supported graphics resolutions1280 x 800 (WXGA)
Throw ratio1.44 - 2.33:1
Focal length range24 - 38.2 mm
Aperture range (F-F)1.7 - 2.3
Vertical lens shift range-67 - 67 %
Horizontal lens shift range-30 - 30 %
Audio (L/R) in3
Audio (L/R) out1
Serial interface typeRS-232
USB 2.0 ports quantity2
Ethernet LAN data rates10, 100 Mbit/s
Noise level39 dB
Country of originChina
Noise level (economic mode)31 dB
PlacementDesktop, Ceiling
Product typeLarge venue projector
Product colorWhite
Market positioningPresentation
Cable lock slot typeKensington
RMS rated power10 W
Power sourceAC
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.3 W
Power consumption (typical)572 W
Power consumption (PowerSave)477 W
Storage temperature (T-T)-10 - 60 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Pallet width800 mm
Pallet height2425 mm
Pallet length1200 mm
Pallet weight0 g
Pallet width (UK)1000 mm
Quantity per pack1 pc(s)
Quantity per pallet14 pc(s)
Quantity per pallet layer2 pc(s)
Harmonized System (HS) code85286200
Software supportvia: AMX, Crestron (Network), Control4
Weight and Dimensions IconWeight and Dimensions
Depth472 mm
Width525 mm
Height189 mm
Weight12700 g
Package depth765 mm
Package width680 mm
Package height290 mm
Package weight20740 g

Related product manuals