EasyManua.ls Logo

Epson EB‑L255F - Projector Specifications

Epson EB‑L255F
247 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Projector Specifications
234
Product name EBL255F/EBL250F/EBL200F/EBL200W/EBL200X
Dimensions 325 (W) × 90 (H) × 299 (D) mm (not including raised
section)
LCD panel size EBL255F/EBL250F/EBL200F:
0.62"
EBL200W:
0.59"
EBL200X:
0.63"
Display method Poly-silicon TFT active matrix
Resolution EBL255F/EBL250F/EBL200F:
2,073,600 dots *
FWXGA (1366 (W) × 768 (H) dots) × 3
EBL200W:
1,024,000 dots
WXGA (1280 (W) × 800 (H) dots) × 3
EBL200X:
786,432 dots
XGA (1024 (W) × 768 (H) dots) × 3
Focus adjustment Manual
Zoom adjustment 1.0 to 1.62
Light source Laser diode
Light source output power Up to 81 W
Wavelength 449 to 461 nm
Light source life ** Light Source Mode: Normal or Quiet: Up to about
20,000 hours
Light Source Mode: Extended: Up to about 30,000 hours
Max. audio output 16 W
Speaker 1
Power supply 100-240V AC±10% 50/60Hz 2.7 - 1.2 A
Operating power
consumption (100 to 120
V area)
Light Source Mode: Normal, Custom: 265 W
Light Source Mode: Quiet, Extended: 201 W
Operating power
consumption (220 to 240
V area)
Light Source Mode: Normal, Custom: 254 W
Light Source Mode: Quiet, Extended: 193 W
Standby power
consumption
Communication On: 2.0 W
Communication Off: 0.5 W
Operating altitude Altitude 0 to 3,048 m
Operating temperature
(when using a single
projector installation) ***
Altitude of 0 to 2,286 m: 0 to +40°C (No condensation)
Altitude of 2,287 to 3,048 m: 0 to +35°C (Humidity of
20 to 80%, No condensation)
Operating temperature
(when using a multiple
projector installation) ***
Altitude of 0 to 2,286 m: 0 to +35°C (No condensation)
Altitude of 2,287 to 3,048 m: 0 to +30°C (Humidity of
20 to 80%, No condensation)
Storage temperature -10 to +60°C (Humidity of 10 to 90%, No condensation)
Mass Approx. 4.1 kg
* Pixel shifting technology achieves Full HD resolution on screen.
** Approximate time until the light source brightness decreases to half of its
original value. (Assuming the projector is used in an atmosphere in which
airborne particulate matter is less than 0.04 to 0.2mg/m3. The estimated time
varies depending on the projector usage and operating conditions.)
*** Light source brightness automatically dims if the surrounding temperature
gets too high. (Approximately 35°C at an altitude of 0 to 2,286 m, and
approximately 30°C at an altitude of 2,287 to 3,048 m; however, this may vary
depending on the surrounding environment.)
This product is also designed for IT power distribution system with phase-to-
phase voltage 230V.
gg Related Links
"Connector Specifications" p.235

Table of Contents

Related product manuals