Epson EB‑L255F - Displaying a Test Pattern

Displaying a Test Pattern
48
You can display a test pattern to adjust the projected image without
connecting a computer or video device.
a
• The test pattern's shape is determined by the Screen Type setting. Be
sure to set the correct screen type before adjusting with the test
pattern.
• To set menu items that cannot be set while the test pattern is being
displayed or to fine-tune the projected image, project an image from
the connected device.
a
Turn on the projector.
b
Press the [Menu] button on the control panel or remote control.
c
Select the Installation menu and press [Enter].
d
Select Test Pattern and press [Enter].