Epson EB-PU2010B - SMTP Server; Port Number; From; Address 1 Setting;Address 2 Setting;Address 3 Setting

Network Menu
107
SMTP Server
s Network > Network Configuration > Notifications > SMTP Server
Enter the IP address for the projector's SMTP server using 0 to 255 for each
address field.
Do not use these addresses: 127.x.x.x, 192.0.2.x or 224.0.0.0 through
255.255.255.255 (where x is a number from 0 to 255).
Port Number
s Network > Network Configuration > Notifications > Port Number
Enter a number for the SMTP server Port Number from 1 to 65535 (default is
25).
From
s Network > Network Configuration > Notifications > From
Enter the e-mail address of the sender up to 64 alphanumeric characters long.
(Do not use " ( ) , : ; < > [ \] spaces.)
a
You can enter up to 32 alphanumeric characters long in the projector
menu. To enter more than 32 characters, use your Web browser.
Address 1 Setting/Address 2 Setting/Address 3
Setting
s Network > Network Configuration > Notifications > Address 1 Setting
s Network > Network Configuration > Notifications > Address 2 Setting
s Network > Network Configuration > Notifications > Address 3 Setting
Enter the e-mail address to receive notifications up to 64 alphanumeric
characters long. (Do not use " ( ) , : ; < > [ \] spaces.) And select the alerts you
want to receive.
a
You can enter up to 32 alphanumeric characters long in the projector
menu. To enter more than 32 characters, use your Web browser.
SNMP
s Network > Network Configuration > Notifications > SNMP
Set to On to monitor the projector using SNMP. To monitor the projector,
you need to install the SNMP manager program on your computer. SNMP
should be managed by a network administrator.
Trap IP Address 1/Trap IP Address 2
s Network > Network Configuration > Notifications > Trap IP Address 1
s Network > Network Configuration > Notifications > Trap IP Address 2
Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for
each address field.
Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255
(where x is a number from 0 to 255).
Community Name
s Network > Network Configuration > Notifications > Community Name
Enter the SNMP community name up to 32 alphanumeric characters long.
(Do not use spaces and any symbols other than @.)