Settings Menu
84
Constant Brightness on
A
Brightness level
B
Time the projector can maintain constant brightness (approximate)
Brightness Level setting Time the projector can maintain constant brightness
(approximate)
85% 6,000 hours
80% 10,000 hours
70% 19,000 hours
60% 29,000 hours
50% 41,000 hours
40% 56,000 hours
30% or less 78,000 hours or more
Remote Receiver
s Settings > Remote Receiver
When the remote control does not operate stably due to noise from other
devices, you can limit reception of remote control signals to the selected
receiver; Off turns off all receivers.
a
You can turn on all remote receivers by holding down the [Menu]
button on the remote control for approximately 15 seconds.
User Button
s Settings > User Button
You can assign the following menu options to the [User] buttons on the
remote control for one-touch access.
• Light Source Mode
• Multi-Projection
• Resolution
• On-Screen Display
• Display the QR Code
• Image Enhancement
• Frame Interpolation
• Link Menu
• Content Playback
• USB
a
The USB option is only displayed when Content Playback is set to On.
Test Pattern
s Settings > Test Pattern
You can display a test pattern to assist in focusing and zooming the image and
correcting image shape.
To Next Page
Loading...
