Settings Menu
86
a
• You cannot select the Overlay Effect setting in the following cases.
• When Edge Blending is set to On in the projector's Extended
menu.
• When the current source is USB and there is no playlist being
played.
• When the current source is USB and an unwritable error has
occurred.
• You can use the following methods to create playlists.
• Using Epson Projector Content Manager on your computer.
You can download and install Epson Projector Content Manager
from the following Web site.
epson.sn
• Using Epson Web Control with a Web browser.
• Using Epson Creative Projection on iOS devices.
You can download Epson Creative Projection from the App Store.
Any fees incurred when communicating with the App Store are the
responsibility of the customer.
• Press the [USB] button on the remote control to project the playlist.
If there is a timetable assigned, the playlist will play back according
to the schedule in the timetable.
• You can also hold down the [Num] and numeric buttons to project
your favorite playlist. You can set a remote control shortcut key
using the software you used to create the playlists.
gg Related Links
• "Creating Playlists Using Epson Web Control" p.86
• "Content Playback Mode Restrictions" p.87
Creating Playlists Using Epson Web Control
In Content Playback mode, you can create playlists using a Web browser and
save them to a USB flash drive connected to a projector on a network.
Attention
Do not remove the USB flash drive from the projector or disconnect the projector's
power cord while creating playlists. Data saved on the USB flash drive may be
damaged.
a
Make sure the projector is operating in Content Playback mode.
b
Make sure your computer or device is connected to the same network
as the projector.
c
Make sure a USB flash drive is connected to the projector's USB-A port.
d
Start your Web browser on your computer or device.
e
Go to the Epson Web Control screen by entering the projector's IP
address into the browser's address box. When entering an IPv6 address,
wrap the address with [ and ].
f
Select USB Memory Device.
g
Select Upload New Data.
h
Select the images or movies you want to add to the playlist.
a
You can upload .avi, .jpeg (.jpg), .png, .bmp, or .gif files.
If you want to add .mp4 or .mov files to the playlist, use the
Epson Projector Content Manager software or the Epson
Creative Projection app.
The selected files are copied to the connected USB flash drive.
i
Do one of the following:
• To add them to the existing playlist, select Add to Playlist and select
the playlist you want to add them to.
• To create a new playlist and add them to it, select Create New
Playlist.
j
Edit the playlist.
k
When you have finished editing the playlist, select Finish.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
