Laser Safety Information
186
This projector is a Class 1 laser product that complies with the IEC/EN60825-
1:2014 international standard for lasers.
Follow these safety instructions when using the projector.
Warning
• Do not open the projector's case. The projector contains a high-powered laser.
• Possibly hazardous optical radiation emitted from this product. Do not look at
operating light source. Eye injury may result.
• As with any bright source, do not stare into the beam, RG2 IEC/EN 62471-
5:2015.
• This projector may become RG3 when an interchangeable lens with a throw
ratio greater than 3.5 is installed. See the manual for the lens list and hazardous
distances before operation. Such combinations of projector and lens are intended
for professional use only, and are not intended for consumer use.
Caution
Do not disassemble the projector when disposing of it. Dispose according to your
local or national laws and regulations.
a
The projector uses a laser as the light source. The laser has the
following characteristics.
• Depending on the surroundings, the brightness of the light source
may decline. The brightness declines a lot when the temperature gets
too high.
• The brightness of the light source declines the longer it is used. You
can change the relationship between usage time and decline in
brightness settings.
gg Related Links
• "Laser Warning Labels" p.186
Laser Warning Labels
Laser warning labels are attached on the projector.
Inside
Top
• Never look into the projector lens when the laser is on. This can damage
your eyes and is especially dangerous for children and pets.
To Next Page
Loading...
