Epson EB-PU2010B - Projector Indicator Status

Projector Indicator Status
150
The indicators on the projector indicate the projector status and let you know
when a problem occurs. Check the status and color of the indicators and then
refer to this table for a solution.
a
• If the indicators display a pattern not listed in the table below, turn
the projector off, unplug it, and contact Epson for help.
• When the Indicators setting is set to Off in the projector's Extended
menu, all indicators are off under normal projection conditions.
s Extended > Operation > Advanced > Indicators
A
Power indicator
B
Status indicator
C
Laser indicator
D
Temp (temperature) indicator
E
Filter indicator
Projector status
Indicator and status Problem and solutions
Power: Lit blue
Status: Lit blue
Laser: Indicator status
varies
Temp: Off
Filter: Off
Normal operation.
Power: Lit blue
Status: Flashing blue
Laser: Indicator status
varies
Temp: Off
Filter: Off
Warming up.
When warming up, wait about 30 seconds for an image
to appear.
All buttons are disabled during warm-up.
Power: Lit blue
Status: Flashing blue
Laser: Off
Temp: Off
Filter: Off
Shutting down or cooling down.
All buttons are disabled during shutting down and
cooling down.
Power: Lit blue
Status: Off
Laser: Off
Temp: Off
Filter: Off
Standby, sleep mode, or monitoring.
When you press the power button, projection starts.
Power: Flashing blue
Status: Off
Laser: Off
Temp: Off
Filter: Off
Preparing for monitoring or quick startup mode. All
features are disabled.