Image Menu
73
You can reset the settings on the Image Enhancement setting to their default
preset settings.
a
You cannot select this setting when the Image Preset Mode setting is
set to Off.
Scene Adaptive Gamma
s Image > Advanced > Scene Adaptive Gamma
You can adjust the coloring according to the scene, and obtains a more vivid
image.
Higher values enhance the more the contrast.
Gamma
s Image > Advanced > Gamma
You can adjust the coloring by selecting one of the gamma correction values,
or referring to a gamma graph. If you want to make finer adjustments, select
Customized.
When you select a smaller value, you can reduce the overall brightness of the
image to make the image sharper. When you select a larger value, the dark
areas of images become brighter, but the color saturation for lighter areas may
become weaker.
a
• Project a still picture to adjust the Gamma. You cannot adjust the
Gamma correctly when projecting movies.
• If you set the Color Mode setting to DICOM SIM in the projector's
Image menu, select the adjustment value according to the projection
size.
• If the projection size is 120 inches or less, select a small value.
• If the projection size is 120 inches or more, select a large value.
• Medical images may not be reproduced correctly depending on your
settings and screen specifications.
RGBCMY
s Image > Advanced > RGBCMY
You can adjust the Hue, Saturation, and Brightness of each color R (red), G
(green), B (blue), C (cyan), M (magenta), Y (yellow) individually.
Dynamic Contrast
s Image > Dynamic Contrast
You can adjust the projected luminance based on the image brightness.
Dynamic Contrast
Set to On to automatically adjust the amount of light.
Response Speed
Select High Speed to adjust the amount of light as soon as the scene
changes.
Black Level
Set the black level when the brightness level of the image signal is zero.
When you select 0%, the light source turns off.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
