Epson EB-PU2010B - Priority Gateway; Pjlink; AMX Device Discovery; Crestron Connected

Network Menu
109
a
See the Web API Specifications for Projectors for details.
Priority Gateway
s Network > Network Configuration > Others > Priority Gateway
You can set the priority gateway.
PJLink
s Network > Network Configuration > Others > PJLink
Set to On to monitor the projector using PJLink.
AMX Device Discovery
s Network > Network Configuration > Others > AMX Device Discovery
Set to On when you want to allow the projector to be detected by AMX
Device Discovery.
Crestron Connected
s Network > Network Configuration > Others > Crestron Connected
Set to On only when monitoring or controlling the projector over the network
using Crestron Connected.
Restart the projector to enable your changes.
a
Enabling Crestron Connected disables the Epson Message Broadcasting
feature in the Epson Projector Management software.
Art-Net
s Network > Network Configuration > Others > Art-Net
Set to On when you want to control the projector using Art-Net.
Net
Enter a number for the projector's Net using 0 to 127 (default is 0).
Sub-Net
Enter a number for the projector's Sub-Net using 0 to 15 (default is 0).
Universe
Enter a number for the projector's Universe using 0 to 15 (default is 0).
Start Channel
Enter the start channel that handles Art-Net using 1 to 500 (default is 1).
Channel Information
You can view the channel information.
Message Broadcasting
s Network > Network Configuration > Others > Message Broadcasting
Set to On to receive the message delivered by Epson Projector Management.
See the Epson Projector Management Operation Guide for details.
a
Setting is only displayed when Crestron Connected is set to Off.
Reset (Network menu)
s Network > Network Configuration > Reset
You can reset all adjustment values on the Network menu to their default
settings.