Name: Epson EB-PU2010B
Brand: Epson
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Extended Menu

Reset

You can reset all adjustment values on the Color Uniformity menu to

their default settings.

The color tone may not be uniform even after adjusting the color

uniformity.

OSD Rotation

s Extended > Display > OSD Rotation

You can rotate the menu display 90°.

User's Logo

s Extended > User's Logo

You can save an image on the projector and display it whenever the projector

turns on. You can also display the image when the projector is not receiving

an input signal. This image is called the user's logo screen.

You can select a photo, graphic, or company logo as the user's logo, which is

useful in identifying the projector's owner to help deter theft. You can prevent

changes to the user's logo by setting up password protection.

Display the image you want to project as the user's logo and then select this

setting.

• If the User's Logo Protection setting in the Password Protection

setting menu is set to On, set to Off before saving the user's logo.

• When you copy the menu settings from one projector to another

using the batch setup feature, user's logo is also copied. Do not

multiple projectors as a user's logo.

• You cannot save content that is protected by HDCP.

• When Content Playback is set to On, you can display the user's logo

only when the projector starts up.

• Adjustments for image shape and display range are temporarily

canceled when you select User's Logo.

Projection

s Extended > Projection

You can set the way the projector faces the screen so the image is oriented

correctly.

You can change the projection mode to flip the image over top-to-

bottom by holding down the [A/V Mute] button on the remote control

for approximately 5 seconds.

Direct Power On

s Extended > Operation > Direct Power On

Set to On to turn on the projector by plugging it in without pressing the

power button.

Note that the projector also turns on automatically in cases such as recovery

from a power outage.

Questions and Answers:

Need help?

Do you have a question about the Epson EB-PU2010B and is the answer not in the manual?

Epson EB-PU2010B Specifications

General

Matrix size	1.03 \
Heat dissipation	1819 BTU/h
Number of colors	1.07 billion colors
Native aspect ratio	16:10
Projection technology	3LCD
Contrast ratio (typical)	2000:1
Screen size compatibility	- \
Projector native resolution	WUXGA (1920x1200)
Keystone correction, vertical	-45 - 45 °
Keystone correction, horizontal	-30 - 30 °
Projector brightness (economic mode)	7000 ANSI lumens
Light source type	Laser
Service life of light source	20000 h
Service life of light source (economic mode)	30000 h
Throw ratio	0.35 - 7.41:1
Focal length range	varies by lens mm
Interchangeable lens	Yes
3D	No
Video processing	10 bit
Video color modes	Cinema, Dynamic, Natural, Presentation, DICOM simulation mode, Multi-projection, BT.709
Analog signal format system	Not supported
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Noise level	37 dB
Preset modes	Cinema, Presentation, Dynamic
Country of origin	Philippines
Noise level (economic mode)	30 dB
Placement	Ceiling, Desktop, Flying frame
Product type	Large venue projector
Product color	Black
Market positioning	Business
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	535 W
Power consumption (economy mode)	452 W
Storage temperature (T-T)	-10 - 60 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Bundled software	Inhalt DIY-App, EasyMP Multi PC Projection, Epson Projektor Content Manager, Epson Projektor Management, Epson Projektor Professional Tool
Supported network protocols	HTTPS, IPv6, SNMP, ESC/VP.net, PJLink
Software support	via: Crestron Integrated Partner, Extron IP Link, Extron XTP, AMX Device Discovery
Pallet weight	0 g
Quantity per pack	1 pc(s)
Quantity per pallet	14 pc(s)
Harmonized System (HS) code	85286200