EasyManuals Logo

Epson EB-PU2010B User Manual

Epson EB-PU2010B
191 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #141 background imageLoading...
Page #141 background image
Cleaning the Lens
141
Clean the projector's lens periodically, or whenever you notice dust or
smudges on the surface.
To remove dust or smudges, gently wipe the lens with lens-cleaning paper.
If the lens is very dirty, use a vacuum cleaner or a air blower to remove any
dust or smudges, and wipe the lens.
To remove stubborn smudges, moisten a soft, lint-free cloth with lens
cleaner and gently wipe the lens. Do not spray any liquid directly on the
lens.
Warning
Do not use a lens cleaner that contains flammable gas. The high heat generated
by the projector may cause a fire.
Attention
Do not wipe the lens immediately after turning off the light source; otherwise,
it could be damaged.
Do not use glass cleaner or any harsh materials to clean the lens and do not
subject the lens to any impacts; otherwise, it could be damaged. Do not use
canned air, or the gases may leave a flammable residue.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-PU2010B and is the answer not in the manual?

Epson EB-PU2010B Specifications

General IconGeneral
Matrix size1.03 \
Heat dissipation1819 BTU/h
Number of colors1.07 billion colors
Native aspect ratio16:10
Projection technology3LCD
Contrast ratio (typical)2000:1
Screen size compatibility- \
Projector native resolutionWUXGA (1920x1200)
Keystone correction, vertical-45 - 45 °
Keystone correction, horizontal-30 - 30 °
Projector brightness (economic mode)7000 ANSI lumens
Light source typeLaser
Service life of light source20000 h
Service life of light source (economic mode)30000 h
Throw ratio0.35 - 7.41:1
Focal length rangevaries by lens mm
Interchangeable lensYes
3DNo
Video processing10 bit
Video color modesCinema, Dynamic, Natural, Presentation, DICOM simulation mode, Multi-projection, BT.709
Analog signal format systemNot supported
Serial interface typeRS-232C
USB 2.0 ports quantity2
Noise level37 dB
Preset modesCinema, Presentation, Dynamic
Country of originPhilippines
Noise level (economic mode)30 dB
PlacementCeiling, Desktop, Flying frame
Product typeLarge venue projector
Product colorBlack
Market positioningBusiness
Cable lock slot typeKensington
Power sourceAC
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.5 W
Power consumption (typical)535 W
Power consumption (economy mode)452 W
Storage temperature (T-T)-10 - 60 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Bundled softwareInhalt DIY-App, EasyMP Multi PC Projection, Epson Projektor Content Manager, Epson Projektor Management, Epson Projektor Professional Tool
Supported network protocolsHTTPS, IPv6, SNMP, ESC/VP.net, PJLink
Software supportvia: Crestron Integrated Partner, Extron IP Link, Extron XTP, AMX Device Discovery
Pallet weight0 g
Quantity per pack1 pc(s)
Quantity per pallet14 pc(s)
Harmonized System (HS) code85286200
Weight and Dimensions IconWeight and Dimensions
Depth436 mm
Width545 mm
Height189 mm
Weight16800 g
Package depth765 mm
Package width570 mm
Package height270 mm
Package weight21876 g

Related product manuals