Epson EB-PU2010B User Manual

Wireless Network Connection
39
You can send images to your projector, as well as monitor and control your
projector, over a network.
To perform these operations, you must install the Epson 802.11b/g/n wireless
LAN module, and then set up your projector and computer using the
projector's Network menus.
After setting up the projector, download and install the following network
software from the following Web site.
epson.sn
• Epson iProjection (Windows/Mac) software allows you to hold interactive
meetings by projecting the user's computer screen over a network. See the
Epson iProjection Operation Guide (Windows/Mac) for instructions.
• Epson iProjection (iOS/Android) app allows you to project from iOS,
Android, or Chromebook devices.
You can download Epson iProjection for free from the App Store or Google
Play. Any fees incurred when communicating with the App Store or Google
Play are the responsibility of the customer.
• Epson Projector Management software (Windows only) sets up your
computer for monitoring and controlling projectors. See the Epson Projector
Management Operation Guide for instructions.
gg Related Links
• "Installing the Wireless LAN Module" p.39
• "Selecting Wireless Network Settings Manually" p.40
• "Selecting Wireless Network Settings in Windows" p.41
• "Selecting Wireless Network Settings in Mac" p.41
• "Setting Up Wireless Network Security" p.42
• "Using a QR Code to Connect a Mobile Device" p.43
• "Using a USB Key to Connect a Windows Computer" p.44
Installing the Wireless LAN Module
To use the projector over a wireless network, install the Epson 802.11b/g/n
wireless LAN module. Do not install any other type of wireless LAN module.
Attention
Never remove the module while its indicator is blue or flashing, or while you are
projecting wirelessly. This could damage the module or lose data.
a
Turn off the projector and unplug the power cord.
b
Loosen the screws and remove the air filter cover as shown (it is
attached with a tether).

Epson EB-PU2010B Specifications

General

Matrix size	1.03 \
Heat dissipation	1819 BTU/h
Number of colors	1.07 billion colors
Native aspect ratio	16:10
Projection technology	3LCD
Contrast ratio (typical)	2000:1
Screen size compatibility	- \
Projector native resolution	WUXGA (1920x1200)
Keystone correction, vertical	-45 - 45 °
Keystone correction, horizontal	-30 - 30 °
Projector brightness (economic mode)	7000 ANSI lumens
Light source type	Laser
Service life of light source	20000 h
Service life of light source (economic mode)	30000 h
Throw ratio	0.35 - 7.41:1
Focal length range	varies by lens mm
Interchangeable lens	Yes
3D	No
Video processing	10 bit
Video color modes	Cinema, Dynamic, Natural, Presentation, DICOM simulation mode, Multi-projection, BT.709
Analog signal format system	Not supported
Serial interface type	RS-232C
USB 2.0 ports quantity	2
Noise level	37 dB
Preset modes	Cinema, Presentation, Dynamic
Country of origin	Philippines
Noise level (economic mode)	30 dB
Placement	Ceiling, Desktop, Flying frame
Product type	Large venue projector
Product color	Black
Market positioning	Business
Cable lock slot type	Kensington
Power source	AC
AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Power consumption (typical)	535 W
Power consumption (economy mode)	452 W
Storage temperature (T-T)	-10 - 60 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %
Bundled software	Inhalt DIY-App, EasyMP Multi PC Projection, Epson Projektor Content Manager, Epson Projektor Management, Epson Projektor Professional Tool
Supported network protocols	HTTPS, IPv6, SNMP, ESC/VP.net, PJLink
Software support	via: Crestron Integrated Partner, Extron IP Link, Extron XTP, AMX Device Discovery
Pallet weight	0 g
Quantity per pack	1 pc(s)
Quantity per pallet	14 pc(s)
Harmonized System (HS) code	85286200

Weight and Dimensions

Depth	436 mm
Width	545 mm
Height	189 mm
Weight	16800 g
Package depth	765 mm
Package width	570 mm
Package height	270 mm
Package weight	21876 g