Extended Menu
89
Message Position
s Extended > Display > Message Position
You can select the position of messages displayed on the screen.
Messages
s Extended > Display > Messages
You can control whether messages are displayed on the screen.
Display Background
s Extended > Display > Display Background
You can select the screen color or logo to display when no signal is received.
a
Setting is only displayed when Content Playback is set to Off.
Startup Screen
s Extended > Display > Startup Screen
You can control whether a special screen appears when the projector starts
up.
a
This function is disabled when you turn on the projector in Quick
Startup mode.
Standby Confirmation
s Extended > Display > Standby Confirmation
You can display a confirmation message after pressing the [Standby] button
on the remote control.
When set to Off, you can turn off the projector simply by pressing the
[Standby] button once.
Air Filter Notice
s Extended > Display > Air Filter Notice
You can display a message when a clog in the air filter is detected.
Screen
s Extended > Display > Screen
You can set the aspect ratio and position of the projected image according to
the type of screen being used.
Screen Type
Set the aspect ratio of the screen to fit the image into the projection area.
Screen Position
You can shift the image position horizontally and vertically if there are
margins between the edge of the image and the projected screen frame due
to the Screen Type setting.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
