Epson EB-PU2010B - Advanced

Accessing a Networked Projector Using a Web Browser
134
a
If the default Web Control Password is set, a screen prompting to
change the password appears before you can view the Advanced
screen. Follow the on-screen instructions to change the password.
It is strongly recommended to change password regularly to prevent an
unauthorized access to your projector.
A
Opens the menus.
B
Displays the menu name you selected.
C
Specifies the projector settings. (The available settings vary depending on your
projector model.)
D
Lock/unlock the projector settings.
E
Updates the projector settings.
a
You cannot change the following settings using Epson Web Control.
• Custom setting for Gamma
• EDID
• HDMI Link
• User Button
• Content Playback
• Simple Stacking
• Message Position
• User's Logo
• Lens Type
• Lens Calibration
• Language
• Wireless LAN Diagnosis
• Search Access Point
• Crestron Connected
• Event ID
• HDBaseT Signal Level
• Antenna Level
a
You can select the following settings only with Epson Web Control.
• Monitor Password (up to 16 alphanumeric characters) (only when
Command Communication is set to Compatible)
• IPv6 Settings (manual)
• HTTP port (port number used for Web Control except for 80
[default], 843, 3620, 3621, 3625, 3629, 4352, 4649, 5357, 10000,
10001, 41794)