Epson EB-PU2010B - Page 155

Projector Status Display Messages
155
Information Description
Main Display the projector's firmware version information.
Video2
Sub
Sub2
HDMI
HDMI2
HDBaseT
System status information
Status Description
OK The projector is in normal operating mode.
Warm-up The projector is warming up.
Standby The projector is in standby mode.
Cool Down The projector is cooling down.
Status Description
Temp Error A high temperature error occurred.
You can check the following status in the Epson Projector
Management software or the Projector Config Tool app.
• Temp Error 2A
• Temp Error 2B
• Temp Error 2C
• Temp Error 03
• Temp Error 12
• Temp Error 2F
• Temp Error 30
• Temp Error 1D
• Temp Error 0C
• Temp Error 23
• Temp Error 32
• Temp Error 4B
• Temp Error 4C
• Temp Error 09
• Temp Error 38
• Temp Error 63
• Temp Error 64
• Temp Error 25
• Temp Error 26
• Temp Error 24
• Temp Error 6F
• Temp Error FE
The device ID number might also be displayed.
Fan Error A fan error occurred.
You can check the following status in the Epson Projector
Management software or the Projector Config Tool app.
• Fan Error 01 (LV1)
• Fan Error 11 (LV2)
• Fan Error 04 (PBS)
• Fan Error 07 (EX)
• Fan Error 22 (LD)
• Fan Error 14 (PS)
• Fan Error 17 (PS2)
• Fan Error 1F (PHW)
The device ID number might also be displayed.