119
6. Press the Menu button to exit.
7. Adjust the aspect ratio for the projected image, if necessary.
Parent topic: Using Basic Projector Features
Related concepts
Image Aspect Ratio
Adjusting the Image Position Using Lens Shift
If you cannot install the projector directly in front of the screen, you can adjust the position of the
projected image using the lens shift feature.
1. Turn on the projector and display an image.
2. Press the arrow buttons on the remote control or the control panel to adjust the position of the
projected image as necessary.
The distance the image can be shifted varies depending on the installed lens. The limits are
described in the following table. You can shift the image up to the listed percentage of the image
height or width.
Lens Vertical Horizontal
ELPLX02S
ELPLX02WS
+45%~70% ±15%
ELPLU03S ±24% ±10%
To Next Page
Loading...
Need help?
General