318
• Never attempt to override safety interlocks.
• All repairs of this projector must be done by licensed service personnel.
• Only trained users with a valid laser light show variance are allowed access to the area where the
projector is installed. The area should be secured and access to it controlled by the owner of the
location.
• The projector generates high amounts of heat. Do not place flammable or combustible objects around
the projector, especially in front of the lens.
Note: See the link below for additional safety laser cautions and other general safety instructions.
Parent topic: Important Safety Instructions
Laser Safety Labels (EB-PU2113W/EB-PU2213B/EB-PU2116W/EB-PU2216B)
Labels are attached to the projector to indicate the level of risk when operating or servicing the projector.
Side
To Next Page
Loading...
