197
3. Press and release the ID button. Within 5 seconds, use the numeric buttons to enter a number for
the projector (for example, 1 for projector ID 1).
Note: If you don't know the projector's ID, press the ID button to temporarily display the projector's
ID on the screen. If the batteries are left out of the remote control for an extended period, the remote
control ID returns to its default setting.
Parent topic: Projector Identification System for Multiple Projector Control
Tiling Images into One Image
You can project the same image from up to 15 projectors to create one large image using the Tiling
feature.
Note: Before tiling, make sure the displayed images from your projectors are rectangular, correctly
sized, and focused.
Note: You can also set up tiling using the Epson Projector Professional Tool. You can download the
software from the Epson support website at epson.com/support (U.S.), epson.ca/support (Canada), or
latin.epson.com/support (Caribbean). This requires the optional external camera and is not compatible
with the ELPLL08 lens.
Configuring Tiling Automatically
Configuring Tiling Manually
Parent topic: Using Multiple Projectors
To Next Page
Loading...
Need help?
General