198
Related references
Additional Projector Software and Manuals
Configuring Tiling Automatically
If your projectors are on a network and you have identified a master projector, you can configure tiling
automatically. This requires the optional external camera and is not compatible with the ELPLL08 lens.
1. Turn on the projector.
Note: Make sure nothing is blocking the built-in camera on the front of the projector.
2. Press the Menu button.
3. Select the Extended menu and press Enter.
4. Select Multi-Projection and press Enter.
You see this screen:
5. Select Projector Grouping and press Enter.
To Next Page
Loading...
Need help?
General