122
4. Adjust the image as necessary.
Note: Some settings may not be available while displaying a test pattern. To adjust these settings,
project an image from a connected device.
5. Press the Esc button to clear the test pattern.
Parent topic: Using Basic Projector Features
Related tasks
Setting the Screen Type
Adjusting the Image Height
If you are projecting from a table or other flat surface, and the image is too high or low, you can adjust
the image height using the projector's adjustable feet. You can adjust the tilt within a range of ±5°. The
feet are detachable, and can be extended approximately 1.4 inches (35 mm).
1. Turn on the projector and display an image.
2. To adjust the image height, rotate the front feet to extend or retract them.
To Next Page
Loading...
Need help?
General