302
Weight (without lens) EB-PU2113W:
Approximately 52.4 lbs (23.8 kg)
EB-PU2213B
Approximately 52.2 lbs (23.7 kg)
EB-PU2116W:
Approximately 53.5 lbs (24.3 kg)
EB-PU2216B:
Approximately 53.3 lbs (24.2 kg)
EB-PU2120W/EB-PU2220B:
Approximately 53.7 lbs (24.4 kg)
Parent topic: Technical Specifications
Projector Electrical Specifications
Note: Specifications are based on having the standard zoom lens (ELPLM15) installed. The lens is not
included with the projector.
Note: For the EB-PU2120W/EB-PU-2220B models, a 220v power is required for full operation and
performance, however, you can use a 120 V power cord to temporarily operate the projector in order to
assist with projector setup. When projecting using a 120 V power cord (not included), the brightness of
the projected image is approximately 60% of the brightness when using a 220 V power cord. Use the
220 V power cord when adjusting the projected image or the lens. You cannot use the Light Source
Mode, Estimated Remains, Refresh Mode, or Light Source Calibration features with the 120 V
power cord. When using a 120 V power cord, it should have a 3-prong plug, a 14 AWG rating and a C19
connector.
Rated frequency 50/60 Hz
To Next Page
Loading...
Need help?
General