Troubleshooting 357
11
11
11
11
11
11
11
11
11
11
11
11
Control panel: Ready and Error lights on
The printer’s front cover is open. Make sure that the printer’s front
cover is closed properly by opening and closing it again.
Control panel: Ready and Error lights on
The printer’s output cover is open. Make sure that the printer’s
output cover is closed properly by opening and closing it again.
Control panel: Ready light on, Error light flashing
The paper loaded in the paper source does not match the required
paper size. Replace with paper of the correct size and click
Continue on the EPSON Status Monitor 3 window that appears.
If you want to change printer driver settings, click Stop.
Control panel: Ready light on, Error light flashing
Front Cover Open
Output Cover Open
Printing on Incorrect Paper Size
Unsupported Paper Size