358 Troubleshooting
The specified paper size is not supported by this printer, or the
paper feed direction is incorrect. To continue printing from the
page after the page that caused the error, click Continue on the
EPSON Status Monitor 3 window that appears. If you want to
change printer driver settings, click Stop.
Control panel: Ready light on, Error light flashing
Data transmission from the computer to the printer is interrupted
and a timeout error has occurred. Click Print Again on the EPSON
Status Monitor 3 window that appears to resume printing. If
printing does not resume, or if you want to change printer driver
settings, click Stop.
Control panel: Ready light on, Error light flashing
The printer does not have sufficient memory to print the current
page. To continue printing from the page after the page that
caused the error, click Continue on the EPSON Status Monitor 3
window that appears. If you want to change printer driver
settings, click Stop.
Control panel: Ready light on
Time Out Error
Insufficient Memory to Print Current Page
Paper Size Warning
To Next Page
Loading...
