Troubleshooting 359
11
11
11
11
11
11
11
11
11
11
11
11
The size of the paper that fed through the printer does not match
the specified paper size. Click Close on the EPSON Status
Monitor 3 window that appears to dismiss the warning.
Control panel: Ready light on
This warning is displayed if an Insufficient Memory to Print
Current Page error has occurred while Auto Continue is set to
On. Click Close on the EPSON Status Monitor 3 window that
appears to dismiss the warning.
Control panel: Ready light flashing
Indicates that the printer is warming up to process and print data.
Control panel: Ready light flashing (flashes at longer intervals
than usual)
Indicates that the photoconductor unit is close to the end of its
service life (less that 5%). Prepare a new photoconductor unit to
replace the current one. See “Photoconductor Unit” on page 314
for instructions.
Not All Pages Are Printed
Warming Up
Replace Photoconductor Unit
To Next Page
Loading...
