248 Troubleshooting
Jam A B (Cover A or B)
When a paper jam occurs in the location shown in the illustration
below, the Jam A B message appears on the printer’s LCD panel.
Follow these steps to clear paper jams from cover A or B.
w
Warning:
Unless specifically instructed in this guide, be careful not to touch
the fuser, which is marked CAUTION HOT SURFACE, or the
surrounding areas. If the printer has been in use, the fuser and
the surrounding areas may be very hot. If you must touch one of
these areas, wait 40 minutes to allow the heat to subside before
doing so.
1. Open cover A.
To Next Page
Loading...
