Epson EPL-N3000 - Information Menu

Functions of the Control Panel 345
B
B
B
B
B
B
B
B
B
B
B
B
*1 This item appears only when the jobs are stored by using the Quick Print Job feature.
*2 This item appears only when Form Overlay data exists.
*3 This item appears only when the Network I/F setting in the Emulation Menu is on.
*4 This item appears only when the corresponding option is installed.
*5 This Item appears only when there is print job data stored in the printer’s Hard Disk
Drive to be printed by using the Quick Print Job Menu.
*6 This Item appears only when there is print job data stored in the printer’s Hard Disk
Drive to be printed by using the Confidential Job Menu.
*7 Available only when Network Config is set to Yes.
*8 When Get IPAddress is set to Auto, all items between IP and GW are not available.
Their default values will be used.
*9 The settings are activated after turning the printer off and then on.
*10The item appears when the appropriate font setting is selected.
*11The item appears when the optional Stacker is installed.
*12The item appears when the optional Duplex Unit is installed.
Information Menu
From this menu you can check the toner level and the remaining
service life of consumable products. You can also print status and
sample sheets showing the printer’s current settings, available
fonts, and a brief summary of available features.
LJ4 Menu FontSource, Font Number, Pitch*
10
, Height*
10
,
Symset, Form, Source Symset, Dest Symset, CR
Function, LF Function, Tray Assign
GL2 Menu GLMode, Scale, Origin, Pen, End, Join, Pen0 to Pen6
PS3 Menu Error Sheet, Image Protect
ESCP2 Menu Font, Pitch, Condensed, T.Margin, Text, CGTable,
Country, Auto CR, Auto LF, Bit Image, ZeroChar
FX Menu Font, Pitch, Condensed, T.Margin, Text, CGTable,
Country, Auto CR, Auto LF, Bit Image, ZeroChar
I239X Menu Font, Pitch, Code Page, T.Margin, Text, Auto CR, Auto
LF, Alt. Graphics, Bit Image, ZeroChar, CharacterSet
Menu Items