60 Using the Standard Printer Software
Re-Print Job
The Re-Print Job option allows you to store the job you are
currently printing so that you can reprint it later directly from the
control panel.
Follow these steps to use the Re-Print Job option:
1. Click the Basic Settings tab.
2. Select the Collate in Printer check box. Specify the number of
copies to be printed, and make other printer driver settings
as appropriate for your document.
3. Click the Optional Settings tab and click Reserve Jobs
Settings. The Reserve Job Settings dialog box appears.
Confidential
Job
data is cleared Data is cleared
Reserve Job
Option
After Printing After Turning Off Printer or Using
Reset All
To Next Page
Loading...
