Troubleshooting 307
9
9
9
9
9
9
9
9
9
9
9
9
Using the Cancel Job button
The Cancel Job button on your printer is the quickest and
easiest way to cancel printing. Pressing this button cancels the
currently printing job. Pressing the Cancel Job button for more
than two seconds deletes all jobs from the printer memory,
including jobs the printer is currently receiving or printing.
Using the Reset menu
Selecting Reset from the control panel’s Reset menu stops
printing, clears the print job being received from the active
interface, and clears errors that may have occurred at the
interface.
Follow these steps:
1. Press the Enter button to access the control panel menus.
2. Press the Down button several times until Reset Menu
appears on the LCD panel, then press the Enter button.
3. Press the Down button once to display Reset.
4. Press the Enter button. Printing is canceled the printer is
ready to receive a new print job.
Contacting Customer Support
If your Epson product is not operating properly and you cannot
solve the problem using the troubleshooting information in your
product documentation, contact customer support services for
assistance. If customer support for your area is not listed below,
contact the dealer where you purchased your product.
To Next Page
Loading...
