Troubleshooting 267
9
9
9
9
9
9
9
9
9
9
9
9
Half-tone images print unevenly
There may be no toner left in
the imaging cartridge.
If the message on the LCD panel or in
EPSON Status Monitor 3 indicates that
the amount of toner left is low, see
“Replacing the imaging cartridge” on
page 224.
The Density setting may be too
low.
Increase the Density setting in the
Printing Menu on the control panel.
Cause What to do
Your paper may be moist or
damp.
Do not store paper in a humid or damp
environment. Be sure to use paper that
is newly unwrapped or in the Extended
Settings on the printer driver. If the
printouts are still not what you
expected, try adjusting the Light/Dark
slider in the More Settings dialog box
accessed through the Basic Setting
menu.
There may be no toner left in
the imaging cartridge.
If the message on the LCD panel or in
EPSON Status Monitor 3 indicates that
the amount of toner is low, see
“Replacing the imaging cartridge” on
page 224.
The gradation setting is too
small when printing graphics.
On the Basic Setting menu in the printer
driver, click More Settings, select the
Enh.MG button, then select Smooth.
To Next Page
Loading...
